有不少人都會發現在使用數控雕刻機時就能夠延長使用壽命，而且早就已經遍及各個不一樣的行業，這就被認定為是一種新型的產物。目前數控雕刻機所使用的壽命基本都是超過10萬個小時以上，在這種情況下，因為轉化率比較高，所以就能夠降低運行的成本，但是使用的壽命并非是完全固定的，還需要進行保養。

Many people will find that when using CNC engraving machine, it can prolong the service life, and it has been widely used in different industries for a long time, which is recognized as a new product. At present, the service life of CNC engraving machines is basically more than 100000 hours. In this case, because the conversion rate is relatively high, the operation cost can be reduced, but the service life is not completely fixed and needs maintenance.

一般情況下使用數控雕刻機，每周進行一次保養就能夠帶來好的作用，特別是在環境比較惡劣的車間，也需要注重于維護和清潔，能夠延長使用的壽命，此時也應該知道該如何來進行維護和保養。一般在使用雕刻機時，同樣還需要保證周邊空氣的流通，能夠避免設備的過熱問題，同時也不應該挪動機器，否則也會影響到設備的壽命。

In general, the use of CNC engraving machine and maintenance once a week can bring good effects, especially in the workshop with poor environment, we also need to pay attention to maintenance and cleaning, which can prolong the service life. At this time, we should also know how to carry out maintenance and maintenance. Generally, when using the engraving machine, it is also necessary to ensure the circulation of surrounding air, which can avoid the overheating problem of the equipment. At the same time, the machine should not be moved, otherwise it will affect the service life of the equipment.

如果發現數控雕刻機出現故障，也需要盡快的切斷電源，要是電壓不穩定又或者是電流過大，可能就會導致設備受到影響。要是數控雕刻機長時間不要使用，也需要馬上切斷電源，同時還應該在下面墊上木板，以防雨季到來時出現被水淹的現象，總之注重于保養，這也是比較關鍵的細節。

If the CNC engraving machine is found to be faulty, it is also necessary to cut off the power supply as soon as possible. If the voltage is unstable or the current is too large, the equipment may be affected. If the CNC engraving machine is not used for a long time, it also needs to cut off the power supply immediately. At the same time, a wooden board should be placed under it to prevent flooding when the rainy season comes. In short, pay attention to maintenance, which is also a key detail.

以上就是為大家介紹的有關五軸保麗龍雕刻機的詳細介紹,希望對您有所幫助.如果您有什么疑問的話,歡迎聯系我們.我們將以的態度,為您提供服務http://www.hbwudeli.com.cn/

The above is the detailed introduction of the five axis poly dragon engraving machine. I hope it will be helpful to you If you have any questions, please contact us We will provide you with professional service http://www.hbwudeli.com.cn/