聯系我們
18560023440
王經理：18560023440
地址：山東省德州市齊河縣經濟開發區齊眾大道7號-2車間
新聞資訊
為什么要定期檢查雕刻機刀具的磨損情況？
來源：http://www.hbwudeli.com.cn 時間：2022-04-16
在日常生產過程中，雕刻機操作人員應嚴格按照操作規程使用機器，控制雕刻機的操作技能，尤其是雕刻用戶更應重視這個問題。雕刻機對雕刻精度的影響比較大。如果雕刻機的雕刻結果因人為因素模糊，損失不值得。
In the daily production process, the engraving machine operators should use the machine in strict accordance with the operating procedures and control the operating skills of the engraving machine, especially the engraving users should pay more attention to this problem. Engraving machine has a great influence on engraving accuracy. If the engraving result of the engraving machine is blurred due to human factors, the loss is not worth it.
如果不清楚雕刻機是否進入工件，還需要檢查雕刻機的雕刻路徑是否有問題。實際操作中積累的經驗有很大的相關性。雕刻效果要選擇什么樣的刀具和雕刻程度等。這些問題需要雕刻機操作人員在實際操作中操作和理解。
If it is not clear whether the engraving machine enters the workpiece, it is also necessary to check whether there is a problem with the engraving path of the engraving machine. The experience accumulated in practical operation is of great relevance. What kind of cutting tool and engraving degree should be selected for engraving effect. These problems need to be operated and understood by engraving machine operators in practical operation.
要檢查雕刻機機架帶動的木工能不能有廢料；機架上沒有碎片，雕刻機主軸上可以有縫隙，也會造成雕刻機雕刻效果模糊。還需要檢查雕刻機主軸的潤滑效果，以免雕刻機半停或卡死。
Check whether the woodworking driven by the engraving machine frame can have waste; There are no fragments on the frame, and there can be gaps on the main shaft of the engraving machine, which will also cause the engraving effect of the engraving machine to be blurred. It is also necessary to check the lubrication effect of the main shaft of the engraving machine to avoid half stop or jamming of the engraving machine.
我們要保持雕刻機干凈整潔，養成每次雕刻機完成后停下來清洗的好習慣，對機器本身是很好的保護。
We should keep the engraving machine clean and tidy, and form the good habit of stopping and cleaning after each engraving machine is completed, which is a good protection for the machine itself.
還有要定期檢查雕刻機刀具的磨損情況，及時提出相應的解決方案(更換或修理)。如果雕刻機的刀具在磨損情況下不更換，雕刻工件的尺寸就會模糊。雕刻機的刀具要及時更換，新的刀具要及時更換，防止使用刀具造成雕刻后果。
In addition, we should regularly check the wear of engraving machine tools and put forward corresponding solutions (replacement or repair) in time. If the cutter of the engraving machine is not replaced in case of wear, the size of the engraving workpiece will be blurred. The cutting tools of the engraving machine shall be replaced in time, and the new cutting tools shall be replaced in time to prevent the engraving consequences caused by the use of cutting tools.
以上就是為大家介紹的有關五軸保麗龍雕刻機的詳細的介紹,希望對您有所幫助.如果您有什么疑問的話,歡迎聯系我們.我們將以的態度,為您提供服務http://www.hbwudeli.com.cn/
The above is a detailed introduction to the five axis poly dragon engraving machine. I hope it will be helpful to you If you have any questions, please contact us We will provide you with professional service http://www.hbwudeli.com.cn/
