石材雕刻機斷刀的原因及處理方法

來源：http://www.hbwudeli.com.cn 時間：2022-04-27 

石材雕刻機具有特殊性，在雕刻過程中經常出現的一個問題就是斷刀現象，主要原因就是石材畢竟是比較堅硬，如果在雕刻過程中冷卻水供應不及時或者加工速度過快，主軸轉速過慢都會影響到刀具和材料。

Stone carving machine has its particularity. One of the common problems in the carving process is the phenomenon of knife breaking. The main reason is that the stone is relatively hard after all. If the cooling water supply is not timely in the carving process, or the processing speed is too fast, the spindle speed is too slow, it will affect the cutting tools and materials.

方法/步驟

Method / step

1、如果刀具斷掉之后，操作人員應該立即暫停機器，然后查看一下當下的加工行號并且詳細的記錄下來。仔細的檢查一下斷刀處看是否有斷刀的刀體，如果有將其取出來。

1. If the tool is broken, the operator should immediately stop the machine, check the current processing line number and record it in detail. Carefully check the broken knife to see if there is a broken knife body. If so, take it out.

2、更重要的就是要分析一下斷刀的主要原因，避免下次再犯。

2. More importantly, it is necessary to analyze the main reasons for the broken knife to avoid making it again next time.

3、然后就是更換刀具，換好刀具后應該注意的是定義原點，在石材雕刻機回到工件原點后X/Y兩軸的位置是正確的，但是Z軸需要重新確定，這就主要是根據已做圖形的樣式來進行操作定義。

3. Then change the tool. After changing the tool, you should pay attention to defining the origin. After the stone engraving machine returns to the workpiece origin, the position of X / Y axis is correct, but the Z axis needs to be determined again, which is mainly defined according to the style of the graphics.

注意事項

matters needing attention

1、立即暫停機器，然后查看一下當下的加工行號并且詳細的記錄下來。

1. Immediately stop the machine, then check the current processing line number and record it in detail.

2、換好刀具后應該注意的是定義原點

2. After changing the tool, you should pay attention to defining the origin

以上就是為大家介紹的有關的詳細介紹,希望對您有所幫助.如果您有什么疑問的話,歡迎聯系我們.我們將以的態度,為您提供服務http://www.hbwudeli.com.cn/

The above is the detailed introduction of stone carving machine. I hope it will be helpful to you If you have any questions, please contact us We will provide you with professional service http://www.hbwudeli.com.cn/

• 上一篇：數控開料機會受到什么樣的因素影響？
• 下一篇：激光雕刻機和機械雕刻機的區別在哪里？

相關產品：
• 
  木工雕刻機
• 
  1325木工雕刻機獨...
• 
  1325木工雕刻機
• 
  1325木工鏤空花格...
• 
  1225型平雕圓雕一...

相關新聞：
• 
  激光雕刻機和機械雕刻...
• 
  三軸雕刻機無心外圓磨...
• 
  石材雕刻機斷刀的原...
• 
  數控開料機會受到什么...
• 
  泡沫雕刻機日常井蓋如...