With the wide application of stone engraving machine, more and more customers who have just begun to understand CNC stone carving machine often ask: "how about the carving speed and how long does it take to carve a square meter"?

雕刻的速度有很多種因素，不可置否的是機器本身的配置，整理的功率。還有就是技術的熟練的掌握程度，刀具的選擇，石材的材質等等詳細分解如下：

There are many factors in the speed of engraving. First of all, it is the configuration of the machine itself and the power of finishing. In addition, the mastery of technology, the selection of cutting tools, and the material of stone materials are detailed as follows:

石材雕刻機

Stone carving machine

1、理論基礎：培訓工作必須從理論培訓工作開始，操作人員必須在理論考核通過的情況下方可進行實際操作培訓。若理論培訓沒有通過，則堅決不能進行操作培訓。

1. Theoretical basis: the training work must start from the theoretical training, and the operators must pass the theoretical assessment before they can carry out practical operation training. If the theoretical training is not passed, the operation training can not be carried out.

2、石材雕刻機刀具的使用問題：在理論培訓以后，必須進行刀具的培訓。操作人員能對常見刀具、雕刻電機轉速、行進速度、注意事項等，必須清楚，操作人員必須熟悉刀具的應用。

2. Stone engraving machine tool use problem: after the theoretical training, must carry on the tool training. The operator must be clear about the common tools, engraving motor speed, travel speed, precautions, etc., and the operator must be familiar with the application of the tool.

3、石料的應用范圍：操作人員必須熟悉各種材料的應用范圍，熟悉不同的材質，不同的厚度、不同的成品大小等。熟悉不同的材料的不同雕刻方式。

3. Application scope of stone: operators must be familiar with the application range of various materials, different materials, different thickness, different size of finished products, etc. Be familiar with different carving methods of different materials.

4、石材雕刻機各種軟件的操作：在通過以上培訓后方可進行軟件培訓。軟件的培訓主要集中在用戶應用的領域;軟件的要求為：軟件的各種排版、各種的操作、路徑的生成、能迅速找出路徑的錯誤等。

4. All kinds of software operation of stone carving machine: software training can be carried out after the above training. The training of software is mainly focused on the field of user application; the requirements of software are: various typesetting, various operations, path generation, and the ability to quickly find path errors.

一、連續運行時間每天10小時以下，保證冷卻水的清潔及水泵的正常工作，絕不可使水主軸電機出現缺水現象，定時更換冷卻水，以防止水溫過高。冬季如果工作環境溫度太低可把水箱里面的水換成防凍液。

1、 The continuous operation time is less than 10 hours a day to ensure the cleaning of cooling water and the normal operation of the water pump. Never make the water spindle motor lack of water. Replace the cooling water regularly to prevent the water temperature from being too high. In winter, if the working environment temperature is too low, the water in the water tank can be replaced with antifreeze.

二、每次機器使用完畢，要注意清理，務必將平臺及傳動系統上的粉塵清理干凈，定期(每周)對傳動系統(X、Y、Z三軸)潤滑加油。(注：X、Y、Z三軸光桿用機油進行保養；絲桿部分加高速黃油；冬季如果工作環境全自動電腦雕刻機溫度太低絲桿、光桿(方形導軌或圓形導軌)部分應先用汽油進行沖洗清潔，然后加入機油，否則會造成機器傳動部分阻力過大而導致機器錯位。)

2、 Every time the machine is used, attention should be paid to cleaning. The dust on the platform and transmission system must be cleaned, and the transmission system (x, y, Z three axes) should be lubricated regularly (weekly). (Note: X, y, Z three-axis polished rod is maintained with oil; screw rod is added with high-speed grease; in winter, if the temperature of full-automatic computer engraving machine is too low, the screw rod and polished rod (square guide rail or circular guide rail) shall be washed with gasoline first, and then oil shall be added, otherwise, the resistance of transmission part of the machine will be too high, resulting in machine dislocation. )

三、對電器進行保

3、 Protect electrical appliances

養檢查是，一定要切斷電源，待監視器無顯示及主回路電源指示燈熄滅后，電腦木工雕刻機可進行。

Maintenance inspection is, must cut off the power supply, until the monitor has no display and the main circuit power indicator light is off, the computer woodworking engraving machine can be carried out.

以上就是小編分享的全部內容了，大家如果還有其他想要了解的，可以通過下面的聯系方式，咨詢廠家，廠家會給您詳細介紹產品內容。

The above is the small editor to share all the content, if you have other want to know, you can contact the following, consult the manufacturer, the manufacturer will give you a detailed description of the product content.