雕刻機產生雕刻不圓滑的原因是什么？

來源：http://www.hbwudeli.com.cn 時間：2021-01-11 

對于保麗龍雕刻機雕刻不圓滑的原因及解決技巧，我們一起去了解一下。下面把引起雕刻機雕刻不圓滑的原因和解決方法進行總結分析，希望對于大家有所幫助。

For engraving machine engraving is not smooth reasons and solutions, we go to understand. The following causes of engraving machine engraving is not smooth reasons and solutions are summarized and analyzed, I hope to help you.

相對于小編分析出來的原因一個就是動作會比較大，二是原因如雕刻機是圓軌的就要想方法換導軌或滑塊。

Compared with Xiaobian analysis, one of the reasons is that the action will be relatively large, and the other is that if the engraving machine is a circular track, we need to find a way to change the guide or slider.

視原因而定。如是方軌就簡單許多只需調整上下或前后滑塊即可。雕刻機刻字不圓滑以我所知道的來說可能有兩方面的原因引起：

It depends on the reason. If it's a square track, it's much simpler. Just adjust the up and down or front and rear sliders. As far as I know, there may be two reasons for the unsmooth engraving of engraving machine

原因1、雕刻機直線速度與曲線速度相差太大導致雕刻機在走曲線時震動過大使雕刻路徑出現偏差而出現刻字不圓滑。

Reason 1, engraving machine linear speed and curve speed difference is too big, resulting in engraving machine in walking curve vibration too much, resulting in carving path deviation and appear not smooth.

解決方法：則要更改直線或曲線速度，更改值以雕刻機自身參數而定。

Solution: to change the speed of straight line or curve, the change value depends on the engraving machine's own parameters.

原因2、雕刻機y軸或x軸出現間隙也可能兩軸同時有間隙，導致雕刻過程中晃動使雕刻路徑出現偏差引起刻字不圓滑。

Reason 2: there may be a gap between the y-axis or x-axis of the engraving machine, or there may be a gap between the two axes at the same time, which leads to the shaking in the engraving process and the deviation of the engraving path, resulting in the unsmooth engraving.

解決方法：因如雕刻機是圓軌的就要想辦法換導軌或滑塊，動作會比較大，視原因而定。如是方軌就簡單許多只需調整上下或前后滑塊即可。

Solution: if the engraving machine is a round rail, we should find a way to change the guide rail or slider, the action will be larger, depending on the reason. If it's a square track, it's much simpler. Just adjust the up and down or front and rear sliders.

經過上面解釋雕刻機雕刻不圓滑的原因及解決技巧。相信大家可以讓雕刻機穩定工作。廣大購買雕刻機的朋友在使用過程中如遇困難可隨時聯系墨源在線客服：http://www.hbwudeli.com.cn

After the above explanation, the reason why the engraving machine is not smooth and the solution skills. I believe you can make the engraving machine work stably. The majority of friends who buy engraving machines can contact Moyuan online customer service at any time if they encounter difficulties in using them http://www.hbwudeli.com.cn

• 上一篇：雕刻機使用前后需要做哪些工作？
• 下一篇：玉石雕刻機的標準配置是什么?

相關產品：
• 
  木工雕刻機
• 
  1325木工雕刻機獨...
• 
  1325木工雕刻機
• 
  1325木工鏤空花格...
• 
  1225型平雕圓雕一...

相關新聞：
• 
  激光雕刻機和機械雕刻...
• 
  三軸雕刻機無心外圓磨...
• 
  石材雕刻機斷刀的原...
• 
  數控開料機會受到什么...
• 
  泡沫雕刻機日常井蓋如...