聯系我們
18560023440
王經理：18560023440
地址：山東省德州市齊河縣經濟開發區齊眾大道7號-2車間
業內資訊
保麗龍雕刻機的速度慢是什么原因？
來源：http://www.hbwudeli.com.cn 時間：2021-04-22
近幾年來使用保麗龍雕刻機的用戶越來越多，很多用戶選擇雕刻機行業作為起家創業，因此很多用戶是剛開始起家做雕刻機行業，所以對雕刻機的選擇也很謹慎，比如雕刻機的雕刻精度、速度、范圍包括售后服務等方面很小心謹慎。那么雕刻機的雕刻速度慢是什么原因導致的呢?
In recent years, there are more and more users using styrofoam engraving machine. Many users choose engraving machine industry as their starting business. Therefore, many users are just starting to do engraving machine industry, so they are very cautious about the choice of engraving machine, such as engraving precision, speed, range, including after-sales service, etc. So what is the reason for the slow carving speed of the engraving machine?
一、機器的配置
1、 Machine configuration
機器自身的配置是導致雕刻機速度慢的原因之一，如果雕刻機的電機功率自身就小，是不可能把雕刻速度調高的，因為根本是帶不起來的！
First of all, the configuration of the machine itself is one of the reasons for the slow speed of the engraving machine. If the motor power of the engraving machine itself is small, it is impossible to increase the engraving speed, because it can't be brought up at all!
二、基本的理論
2、 Basic theory
操作人員一定要從理論工作開始培訓，一定要在理論考核通過的情況下進行機器操作，只有對機器有了充分的了解才能更好地操作機器設置。
Operators must start training from theoretical work and operate the machine after passing the theoretical examination. Only when they have a full understanding of the machine can they operate the machine better.
三、刀具的培訓
3、 Tool training
必須進行刀具的培訓，操作員必須要對常見刀具、雕刻機電機轉速、行進速度等知識必須要了解清楚，要完全掌握刀具的應用在操作機器。
It is necessary to carry out the training of cutting tools. The operator must have a clear understanding of the common cutting tools, motor speed of engraving machine, traveling speed and other knowledge, and fully master the application of cutting tools in the operation of the machine.
四、加工材料的應用
4、 Application of processing materials
操作員必須要熟悉各種不同的加工材料，不一樣的材料、不一樣的厚度、成品大小不一樣等，必須要掌握每一種材料的雕刻方式以及雕刻速度。
Operators must be familiar with different processing materials, different materials, different thicknesses, different sizes of finished products, etc. they must master the carving method and carving speed of each material.
五、操作軟件
5、 Operation software
要把以上培訓掌握之后在進行軟件的培訓，軟件的培訓主要集中在用戶應用的領域。軟件的要求為：軟件的各種排版、各種的操作、路徑的生成、能迅速找出路徑的錯誤等。
After mastering the above training, we should carry out software training, which mainly focuses on the application field of users. The requirements of the software are: all kinds of typesetting, all kinds of operation, the generation of path, the ability to quickly find out the path error, etc.
六、雕刻的速度
6、 The speed of carving
雕刻速度的快慢會影響雕刻精度，對雕刻精度要求的越高，雕刻速度就不能太快，速度過快，床身就會晃動從而會影響精度。
The speed of engraving will affect the accuracy of engraving. The higher the accuracy of engraving, the faster the engraving speed can not be. If the speed is too fast, the bed will shake, which will affect the accuracy.
- 上一篇：玉石雕刻機的標準配置是什么?
- 下一篇：石材雕刻刀壞的原因有一下幾點?
