The engraving programming software of the aluminum plate engraving machine programs the engraving path: for example, for engraving text, first use the software to layout, and then use 2D, 3D and cutting. Enter the parameters such as depth, overlap rate and line spacing in the pop-up dialog box and calculate it on the computer. When processing relief, first use ArtCAM or fine engraving to generate relief from file or model image, determine the size, input various processing parameters, and the computer starts calculation. When generating paths, colored lines are generated for words or models.

輸出雕刻路徑及輸入雕刻機控制系統軟件：在文泰、精雕、ARTCAM等軟件輸出文件中，如果雕刻機控制系統不能支持該格式，也需要轉換。常見的程序格式是nc、mmg等。

Output engraving path and input engraving machine control system software: in Wentai, Jingdiao, ArtCAM and other software output files, if the engraving machine control system cannot support this format, it also needs to be converted. The common program formats are NC, MMG, etc.

檢查機器并正確固定工件：檢查機床上是否有碎片，尤其是石粒、大面積的石粉、砂等，注意清理，否則容易影響材料的平面度。將工件按排版編程軟件里的放置方向，看橫向還是豎向放置材料。注意材料和機器走向軸方向平行，不要放偏了。使用壓板固定材料，一般固定方式有壓力和上二。用壓板按壓時，請注意不要按壓材料的加工部分，以防止機械碰撞或刀具碰撞。

Check the machine and fix the workpiece correctly: check whether there are fragments on the machine tool, especially stone particles, large-area stone powder, sand, etc. pay attention to cleaning, otherwise it is easy to affect the flatness of the material. Place the workpiece according to the placement direction in the typesetting programming software to see whether the material is placed horizontally or vertically. Note that the material is parallel to the axis of the machine, and do not deviate. The pressing plate is used to fix the material. The general fixing methods are pressure and upper two. When pressing with a pressing plate, be careful not to press the machined part of the material to prevent mechanical collision or tool collision.

確定工件坐標系原點，也就是我們常說的對刀。將機器的每個軸的起源與原始點對齊，然后將數據返回到零或輸入相應坐標的坐標。

Determine the origin of workpiece coordinate system, that is, we often say tool setting. Align the origin of each axis of the machine with the original point, and then return the data to zero or enter the coordinates of the corresponding coordinates.

檢測噴水、水循環，調節機械轉速和進給速度，在鋁板雕刻機控制系統中進行模擬。

Detect the water spray and water circulation, adjust the mechanical speed and feed speed, and simulate it in the control system of aluminum engraving machine.

啟動雕刻機。加工完成。確認鋁板雕刻機的雕刻效果是否滿意，以及是否需要補刀。

Start the engraving machine. Processing is complete. Confirm whether the engraving effect of the aluminum plate engraving machine is satisfactory and whether it needs to repair the knife.