Work efficiency is equal to the improvement of production efficiency, which is very necessary for the development and growth of enterprises. Therefore, improving the working efficiency of four axis styrofoam engraving machine is the embodiment of improving work efficiency. However, there are many ways to improve the working efficiency of the four axis styrofoam engraving machine. The manufacturer of the four axis styrofoam engraving machine is introduced in detail.

根據不同的材料確定不同的吃刀量。由于不同材料的刀具都會有一個吃刀量，我們用四軸保麗龍雕刻機進行加工的時候，盡量不要用刀具的吃刀量進行加工，長時間加工的話，刀具損壞的比較快。而且在吃刀量下進行加工時速度還提不上來，速度一快就很可能造成斷刀。

According to different materials to determine the different amount of knife. Since the cutting tool of different materials will have a cutting capacity, when we use the four axis styrofoam engraving machine for processing, we should try not to use the cutting capacity of the cutting tool for processing. If processing for a long time, the tool will be damaged faster. In addition, the cutting speed can not be raised when processing under the cutting amount, and the cutter may be broken if the speed is fast.

所以我們就不如把下刀量設置成量的2/3,這樣刀具壽命也會大大增長，加工速度還可以提高很多；如此一來既可以節省刀具成本，也可以提高加工效率。根據雕刻材料的粗細確定下刀深淺。我們要根據實際情況行粗加工，然后進行精加工。當在粗加工時，盡可能切除全部余量，節省精加工時間；還可以采用加工性能更好的刀具材料。

Therefore, we might as well set the cutting amount to 2 / 3 of the amount. In this way, the tool life will be greatly increased, and the processing speed can be improved a lot. In this way, the tool cost can be saved and the processing efficiency can be improved. According to the thickness of the carving material to determine the depth of the knife. We should carry out rough machining first and then finish machining according to the actual situation. In rough machining, all the allowance should be cut off as much as possible to save the finishing time; the tool material with better machining performance can also be used.

四軸保麗龍雕刻機的性能不僅體現在機器的硬件配置，還需要我們長期的積累加工經驗，來提高雕刻機的加工效率。總之，不管是四軸保麗龍雕刻機也好，還是石材雕刻機也罷，主要的一點就是根據雕刻材料的硬度和雕刻刀具的性能來確定一個合理的切削用量，這樣才能發揮雕刻機的優點，達到預期的雕刻效果。這就是提高四軸保麗龍雕刻機工作效率的小技巧。

The performance of the four axis styrofoam engraving machine is not only reflected in the hardware configuration of the machine, but also requires our long-term accumulated processing experience to improve the processing efficiency of the engraving machine. In short, whether it's a four axis styrofoam engraving machine or a stone carving machine, the main point is to determine a reasonable cutting amount according to the hardness of the carving material and the performance of the carving tool, so as to give full play to the advantages of the engraving machine and achieve the desired carving effect. This is to improve the efficiency of four axis styrofoam engraving machine skills.