Since the CNC machine has been used to replace the machine in the later stage of the furniture industry, there are many problems that will affect the development of the CNC furniture industry. Four procedures of CNC cutting machine errors and a few points for attention.

主軸的功率大小影響著加工效果，若加工產品需要進行切割開料功能，建議選用大功率主軸，切割速度快，效果好，一般是選用2個6KW大功率的風冷主軸。2個4.5kw風冷主軸、基本的就是伺服電機，有的朋友想要好一些的電機但不想投資過多，則可以選擇國產伺服電機。若是本身機器功能，各配置都很高。建議數控開料機也用進口伺服電機。

The power of the main shaft affects the processing effect. If the processing product needs cutting and cutting function, it is recommended to select high-power spindle with fast cutting speed and good effect. Generally, two 6kW high-power air-cooled spindles are selected. Two 4.5kw air-cooled spindles, the basic is servo motor, some friends want better motor, but do not want to invest too much, they can choose domestic servo motor. If the function of the machine itself is comprehensive, each configuration is very high. It is suggested that the imported servo motor should also be used in the CNC cutting machine.

很多數控開料機朋友在數控開料機購買機器時會提到，加工整張板子用吸附臺面很好，但有時候加工小材料感覺開吸附泵費電，所以想要吸夾兩用的臺面，這種臺面可以做，大家可能覺得兩用的很好，這種認知是錯誤的！它的吸附效果沒有全吸附臺面的好！吸附臺面是有分區的，非整張的板子可以開單個吸附區域以達到節約用電的目的。

Many friends of CNC cutting machine will mention that it is very good to use adsorption table for processing the whole board when purchasing the machine, but sometimes it costs electricity to open the adsorption pump when processing small materials, so you want a table with dual-purpose suction and clamping. You may think that the dual-purpose table is very good. This kind of cognition is wrong! Its adsorption effect is not as good as the full adsorption table! The adsorption table is divided into zones, and a single adsorption area can be opened for the incomplete board to achieve the purpose of saving electricity.

提到吸附臺面，就不得不說說吸附泵的選擇了。吸附泵分風冷和水冷數控開料機的吸附泵，風冷的吸附泵噪音較水冷的吸附泵要大一些，但使用水冷的吸附泵的北方朋友們則在秋冬時要注意防凍問題。所以大家可以根據自己所在地域氣候情況選擇適合的吸附泵。

Referring to the adsorption table, we have to talk about the selection of adsorption pump. Adsorption pump is divided into air-cooled and water-cooled CNC cutting machine. The noise of air-cooled adsorption pump is higher than that of water-cooled adsorption pump, but northern friends who use water-cooled adsorption pump should pay attention to antifreeze problem in autumn and winter. So you can choose the appropriate adsorption pump according to the local climate.