雕刻機以其快速的雕刻效率，熟練的雕刻工藝，很快贏得了眾多客戶的青睞，隨著大量的保麗龍雕刻機充實到市場，由于缺乏正確的操作人員，客戶往往在使用過程中碰到一些小問題不知如何解決。墨淵作為雕刻機的供應商來為大家介紹一下雕刻機的主軸水冷堵死該如何進行解決：
Engraving machine with its rapid carving efficiency, skilled carving technology, quickly won the favor of many customers, with a large number of styrofoam engraving machines to the market, due to the lack of correct operators, customers often encounter some small problems in the use process, do not know how to solve them. As the supplier of engraving machine, Moyuan introduces how to solve the problem of water-cooling blocking of the main shaft of engraving machine
雕刻機主軸水冷堵死不通水，主要是因?yàn)榈窨虣C(jī)主軸的水路堵塞造成的，可以先暫停設備的運行，然后使用氣槍反復疏通循環冷卻水路，疏通完畢之后，更換雕刻機主軸冷水機的循環冷卻水（純凈水或者蒸餾水），防止水垢生成的同時過濾水中雜質，確保主軸冷水機的水質干凈，提升冷水機的制冷效果。


The main reason for the water blocking of the main shaft of the engraving machine is that the water channel of the main shaft of the engraving machine is blocked. The operation of the equipment can be suspended first, and then the circulating cooling water of the main shaft water cooler of the engraving machine can be dredged repeatedly by using an air gun. After dredging, the circulating cooling water (pure water or distilled water) of the main shaft water cooler of the engraving machine shall be replaced to prevent scale formation and filter impurities in the water to ensure the main shaft cold water The water quality of the chiller is clean, which improves the refrigeration effect of the chiller.
由于雕刻機加工特性，現在目前大部分雕刻主軸都是選用的水冷主軸，而水冷主軸就需要使用水循環進行降溫處理，并保證在雕刻過程中水循環不能中斷。很多客戶在主軸水循環不太注意，很容易會導致主軸水循環不好，或者主軸水循環堵塞現象。要想避免這樣的問題發生，客戶只要做好以下幾點即可。
Due to the processing characteristics of engraving machine, at present, most carving spindles are water-cooled, and the water-cooled spindle needs to use water circulation for cooling treatment, and ensure that the water circulation can not be interrupted in the engraving process. Many customers do not pay attention to the water circulation of the main shaft, which can easily lead to poor water circulation of the main shaft or blockage of the water circulation of the main shaft. To avoid such problems, customers need to do the following.
一、保證水質的干凈，不能有任何雜質，以防阻塞電機的進水口；
1、 Ensure that the water quality is clean and free of any impurities to prevent blocking the water inlet of the motor;
二、水泵功率一定不能太小，否則由于主軸和水泵有高低落差，而不能很好的進行水循環；
2、 Pump power must not be too small, otherwise because of the spindle and pump have high and low drop, and can not be very good water circulation;
三、注意經常更換或添加純凈水，以免水循環時間過長，水溫過高，在主軸水循環管道內產生水垢；
3、 Pay attention to replace or add pure water frequently, so as to avoid scaling in the main shaft water circulation pipe due to too long water circulation time and too high water temperature;
只要注意好以上三點就可以很好的避免雕刻主軸堵塞或者水循環冷卻效果差的問題，
As long as you pay attention to the above three points, you can avoid the problems of blocking the carving spindle or poor cooling effect of water circulation,