聯系我們
18560023440
王經理：18560023440
地址：山東省德州市齊河縣經濟開發區齊眾大道7號-2車間
新聞資訊
如何應對解決雕刻機工作時的灰塵？
來源：http://www.hbwudeli.com.cn 時間：2020-12-29
隨著雕刻機的發展，它的應用也越來越廣泛，以單一的手工作業已經慢慢的轉向自動化作業。但是，在雕刻機加工過程中一個重要的問題一直困擾著廠家和用戶，在雕刻加工過程中會產生很大的灰塵，雖然目前大多數保麗龍雕刻機都配有吸塵裝置，但是其沒有根本上解決灰塵的問題，下面墨淵雕刻機產生的灰塵應對問題進行分析：
With the development of engraving machine, its application is more and more widely, with a single manual operation has slowly turned to automatic operation. However, an important problem in the process of engraving machine has been puzzling manufacturers and users. A lot of dust will be produced in the process of engraving. Although most of styrofoam engraving machines are equipped with dust suction device, it does not fundamentally solve the problem of dust. The dust generated by the lower surface of Moyuan engraving machine should be analyzed
很多的用戶在用保麗龍雕刻機的時候，如果沒有防塵或者是沒有吸塵會給機器和人帶來危害，粉塵污染，要走綜合治理的路線，從生產設備入手，選用合理的數控開料機設備，輔以一定的防塵、除塵措施。
Many users in the use of styrofoam engraving machine, if there is no dust or no dust will bring harm to the machine and people, to eliminate dust pollution, we should take the route of comprehensive treatment, starting from the production equipment, choose reasonable CNC cutting machine equipment, supplemented by certain dust prevention, dust removal measures.
但在當前條件下，還是選擇除塵設備，除塵設備的選擇要考慮操作現場所要求的凈化程度和粉塵的性質等方面。
But in the current conditions, or choose the dust removal equipment, dust removal equipment selection to consider the operation site required by the degree of purification and the nature of dust and other aspects.
對于大型木塵及中型木塵可以現場及時收集，而對于各種細型木塵，傳統有用的辦法是采用氣力集塵裝置或布袋吸塵設備來收集。如果沒有安裝，可在機床本身附加單機吸塵和集塵裝置，也能起到較好的效果。為了起見，操作工人要佩戴防護眼鏡及防塵口罩，以保護眼睛和呼吸器官，在產生細型木塵的機床上操作的工人，應戴大型口罩，防止粉塵侵害。
For large and medium-sized wood dust, it can be collected on site in time, while for various fine wood dust, the traditional and useful method is to use pneumatic dust collector or bag dust collector. If not installed, the machine itself can be attached to a single dust suction and dust collection device, can also play a better effect. For the sake of safety, operators should wear protective glasses and dust masks to protect their eyes and respiratory organs. Workers operating on machine tools producing fine wood dust should wear large masks to prevent dust invasion.
