石材雕刻機的刀具要怎么保護？

來源：http://www.hbwudeli.com.cn 時間：2021-05-21 

石材雕刻機加工石材相對比手工雕刻，除了效率高外，精度也非常高，石材雕刻機的刀具就顯得尤為重要，如果刀具不好，雕刻加工出來的石材產品就不規整。如何保護石材雕刻機刀具，是每個操作人員都應該知道的。以下，石材雕刻機廠家整理了保護石材雕刻機刀具的方法，一起來看看吧！

Compared with manual carving, stone carving machine has high efficiency and high precision. The cutter of stone carving machine is particularly important. If the cutter is not good, the stone products will be irregular. How to protect the cutting tools of stone carving machine is what every operator should know. The following, stone carving machine manufacturers sorted out the protection of stone carving machine tool method, let's have a look!

1、雕刻機本身機器原因，Z軸速度太快，容易斷刀，刀夾變形容易斷刀。選主軸功率，石材雕刻機一般4500W就可以了，加工速度可以保證，又能較為省電。因此，在石材雕刻機技術尚不成熟的階段選擇一款質量較好的石材雕刻刀是你必 須要考慮的。

1. Engraving machine itself machine reason, z-axis speed is too fast, easy to break the knife, knife clip deformation easy to break the knife. Choose the spindle power, stone carving machine 4500W can be generally, processing speed can be guaranteed, and can save electricity. Therefore, in the stone carving machine technology is not mature stage, choose a better quality stone carving knife is you must consider.

2、材料不符合，金剛石適合雕刻大理石，但是不可能所有的版畫書法都可以雕刻。金剛石適合質地細膩的硬質石材。刀具的使用壽命與走刀的速度關系很大，越硬的石材走刀速度要求越慢。

2. Materials do not match, diamond is suitable for carving marble, but not all of the engraving calligraphy can be carved. Diamond is suitable for hard stone with fine texture. The service life of the cutting tool is closely related to the cutting speed. The harder the stone is, the slower the cutting speed is required.

3、雕刻石材的工作環境有水，刀尖與石材接觸部位要有充足的循要有充足的水分。

3. The working environment of carving stone is water, and the contact part between knife tip and stone should have sufficient circulation and water.

4、在編程時要保證每次下刀時都要柔性進給;對操作者的要求是要在編程時要保證每次下刀時都要柔性進給。刀尖部位要旋轉時接觸物體。

4. In programming, flexible feeding should be ensured every time cutting; The requirement for the operator is to ensure the flexible feed every time when cutting. Contact the object when the tip of the knife needs to rotate.

通過上面的解析，相信你已經知道保護石材雕刻機刀具的注意事項了，這樣，你就能夠更好的使用石材雕刻機了。

Through the above analysis, I believe you already know the precautions to protect the stone carving machine tool, so that you can better use the stone carving machine.

• 上一篇：如何檢驗泡沫雕刻機的機箱？
• 下一篇：石材雕刻機的質量要怎么區分？

相關產品：
• 
  木工雕刻機
• 
  1325木工雕刻機獨...
• 
  1325木工雕刻機
• 
  1325木工鏤空花格...
• 
  1225型平雕圓雕一...

相關新聞：
• 
  激光雕刻機和機械雕刻...
• 
  三軸雕刻機無心外圓磨...
• 
  石材雕刻機斷刀的原...
• 
  數控開料機會受到什么...
• 
  泡沫雕刻機日常井蓋如...